Elinchrom Ranger RX Spécifications

Quick GuideMAKE IT POSSIBLE™ Please read this Quick Guide thoroughly before operating. Also, reviewthe product manuals for your camera, ash systems,

PowerTracking TabSpeedlite Control: Adjusts how Canon Speedlites will respond to the AC3 or ControlTL Transmitter with no AC3.It does not affect the P

Center on ISO Only: PowerTracking will only work with ISO changes. Set the desired ISO using the ISO Center-On control. Aperture changes will be

Learn ModeYour PowerST4 needs to be on the same channel as your transmitter. Channels can be setvia the PocketWizard Utility (recommended) or taught f

ResetRESET A / CHANNEL RESET: To reset the learned channels back to the channels last set in the Utility, hold TEST as you power on the ash. The Stat

PocketWizard.comLPF830 v1.0Warranty:This PocketWizard product is covered under a two-year limited manufacturer’s warranty. For warranty details, and t

Status LEDUPDATE FIRMWARE: Be sure to upgrade all your PocketWizard ControlTL radios (includingthis one) to the latest rmware for proper functionalit

1. Connect the PowerST4 to your RX ash pack via the remote port, then power on the ash.2. Select Zone A, B, or C with the Zone Switch on your Po

AC3 Power Dial =32.72.321.71.310.70.300.30.711.31.722.32.73300RX5.55.14.84.54.13.83.53.12.82.52.11.81.51.10.80.50.50.50.5600RX6.56.15.85.55.14.84.54.

PowerTrackingPowerTracking allows you to adjust your remote studio ash’s output power via the camera’s FEC, ISO and aperture controls. PowerTracking

PowerTracking with an AC3 ZoneController: When using an AC3 in A (Auto Mode), ash output power on your remote ash will automatically track up and do

FEC NOTE: Flash Exposure Compensation (FEC) can be set in many places and all values are added together.FEC can be set: • On the Power Dials of the A

PocketWizard UtilitySome settings require the PocketWizard Utility software and your ControlTLradio connected to a computer via the Mini-USB port. Dow

FlexTT5 or MiniTT1 Transmitter settings that affect the use of a PowerST4:Modeling TabModeling Light Control: Check this box to control modeling light